| |
| Issue |
Title |
| |
| Vol 10, No 1 (2026) |
Analysis and calculation methodology for electrohydrostatic drives of the ground-based transport and technological complexes |
Abstract
PDF (Rus)
|
|
N. S. Galdin, I. A. Semenova |
| |
| Vol 10, No 1 (2026) |
Numerical evaluation of the thermal-hydraulic performance of rectangular riblets in a tube |
Abstract
PDF (Rus)
|
|
S. A. Zaides, Tuan Dung Tran |
| |
| Vol 10, No 1 (2026) |
Influence of high-voltage power lines on main pipelines: Systematization of problems |
Abstract
PDF (Rus)
|
|
Yu. A. Kraus, K. S. Markelova |
| |
| Vol 10, No 1 (2026) |
Diagnostics and predictions of the service life of water silt with quartz sand based on analysis of morphology and element composition of the filter material |
Abstract
PDF (Rus)
|
|
A. A. Teploukhov, D. V. Postnikov, A. R. Zakrantsov, K. E. Gryaznov |
| |
| Vol 10, No 1 (2026) |
Optimization of a hybrid power supply system for the round-the-clock medical center: An economic analysis using HOMER PRO |
Abstract
PDF (Rus)
|
|
Ali Deeb, A. N. Doroshin, Muhammad Deeb |
| |
| Vol 10, No 1 (2026) |
Development of the methodology for testing experimental oil pumps of a vertical spiral compressor |
Abstract
PDF (Rus)
|
|
K. S. Sazonov, V. S. Petrushin, R. R. Yakupov, T. N. Mustafin |
| |
| Vol 10, No 1 (2026) |
Analysis of the efficiency of absorption refrigeration machines for improving the performance of gas turbine gas pumping units |
Abstract
PDF (Rus)
|
|
E. S. Podshivalov, O. V. Kryukov, I. V. Gulyaev, A. V. Saushev |
| |
| Vol 9, No 4 (2025) |
Реверс-инжиниринг и численное моделирование течения вязкого газа ступени центробежного компрессора турбостартера ТС-21 для построения напорной характеристики с целью дальнейшей модернизации |
Abstract
PDF (Rus)
|
|
A. P. Sheshukov, A. M. Yablokov, L. N. |
| |
| Vol 9, No 4 (2025) |
Study of the efficiency of various designs propellers based on numerical modeling of working processes |
Abstract
PDF (Rus)
|
|
A. V. Mesropyan, Yu. A. Shabelnik |
| |
| Vol 9, No 4 (2025) |
Evaluation of the effect of thermal deformations of the main elements of a gerotor screw compressor in calculating the minimum safe operating clearances |
Abstract
PDF (Rus)
|
|
V. A. Pronin, P. A. Belov, V. A. Tsvetkov, M. H. Dzhumaev |
| |
| Vol 9, No 4 (2025) |
Estimation of peat soil freezing time for various systems of its temperature stabilization during roadbed formation |
Abstract
PDF (Rus)
|
|
V. V. Shalay, A. S. Perin, I. A. Yanvarev, A. V. Krupnikov |
| |
| Vol 9, No 4 (2025) |
Analysis of the effect of cylinder wall thickness on the characteristics of a single-stage long-stroke refrigerating compressor |
Abstract
PDF (Rus)
|
|
V. L. Yusha, S. S. Busarov, A. V. Grekhnev |
| |
| Vol 9, No 4 (2025) |
Reducing energy consumption of the complex cleaning unit of the AK1.5 air separation plant |
Abstract
PDF (Rus)
|
|
A. V. Zinovieva |
| |
| Vol 9, No 4 (2025) |
Strength examination of high-speed industrial centrifugal compressor impellers, manufactured by vacuum brazing method |
Abstract
PDF (Rus)
|
|
A. A. Kazantsev, D. R. Malakhov, A. V. Makhonin, F. S. Ryabov, M. V. Solovyev, M. L. Tselmer |
| |
| Vol 9, No 4 (2025) |
Analysis of the combined cycle indicators of the lithium bromide absorption refrigeration machine with double-stage generation (type 3) depending on the parameters of external sources |
Abstract
PDF (Rus)
|
|
O. S. Malinina, A. V. Baranenko, Sh. Z. Bayramov, A. N. Kornilev |
| |
| Vol 9, No 4 (2025) |
Calculations features of the temperature fields of “dry” screw compressor rotors |
Abstract
PDF (Rus)
|
|
T. N. Mustafin, R. R. Yakupov, O. Yu. Paranina |
| |
| Vol 9, No 4 (2025) |
Study of the technological operating regimes of condensate pipelines utilizing hydraulic diodes |
Abstract
PDF (Rus)
|
|
A. Yu. Ovsyannikov, E. A. Dorofeev, E. N. Dubrovskiy |
| |
| Vol 9, No 3 (2025) |
Developing a mathematical model to determine the optimal solar collector tilt angle: a case study of the temperate continental climate in the Omsk region |
Abstract
PDF (Rus)
|
|
A. G. Mikhailov, Yu. A. Anisimov |
| |
| Vol 9, No 3 (2025) |
Predictive analysis of temperature and energy features of medium-pressure process hydrogen compressors based on long-stroke piston stages |
Abstract
PDF (Rus)
|
|
M. A. Sutyaginskiy, Yu. A. Potapov, A. Yu. Gromov, P. V. Ushakov, S. S. Busarov, V. L. Yusha |
| |
| Vol 9, No 3 (2025) |
Development of a mathematical model for technical diagnostics of reciprocating compressors for the rocket and space complex |
Abstract
PDF (Rus)
|
|
R. R. Khotsky, A. V. Burakov, L. G. Kuznetsov |
| |
| Vol 9, No 3 (2025) |
Modeling of heat and mass transfer processes in nanofluids on the example of a parabolic solar collector |
Abstract
PDF (Rus)
|
|
O. V. Vdovin, E. N. Slobodina, A. G. Mikhailov |
| |
| Vol 9, No 3 (2025) |
Methodology for calculating the actuation mechanism of a movable blade system in low-specific-speed centrifugal pumps |
Abstract
PDF (Rus)
|
|
K. E. Denisov, A. K. Liamasov |
| |
| Vol 9, No 3 (2025) |
Modern approaches of the axial compressors optimization |
Abstract
PDF (Rus)
|
|
A. S. Zolotukhin, L. N. Marenina, A. A. Drozdov, A. M. Yablokov, A. G. Nikiforov |
| |
| Vol 9, No 3 (2025) |
Development of a module of direct optimization methods for a two-dimensional automated design system of a centrifugal pump stage |
Abstract
PDF (Rus)
|
|
A. A. Staseyev, A. A. Zharkovskiy |
| |
| Vol 9, No 3 (2025) |
Calculation of fluid pivot of tilting pad journal bearing |
Abstract
PDF (Rus)
|
|
M. B. Khadiev, I. V. Khamidullin, N. V. Sokolov, F. A. Kalimullin |
| |
| Vol 9, No 3 (2025) |
Development of a method for calculating the fluid inertia force in the mathematical model of a straight-line rotary pump |
Abstract
PDF (Rus)
|
|
S. Yu. Kaigorodov, N. E. Kuznetsov, V. L. Zabrovskiy |
| |
| Vol 9, No 2 (2025) |
On the applicability of semi-empirical methods for calculating the operating processes of a single-stage long-stroke reciprocating compressor in the sphere of wet steam |
Abstract
PDF (Rus)
|
|
V. L. Yusha |
| |
| Vol 9, No 2 (2025) |
Methods of considering the balance piston line for calculating a centrifugal compressor performance map |
Abstract
PDF (Rus)
|
|
A. N. Liubimov, A. G. Lakhman |
| |
| Vol 9, No 2 (2025) |
Profiling of operating elements of gerotor screw compressor |
Abstract
PDF (Rus)
|
|
V. A. Pronin, P. A. Belov, V. A. Tsvetkov, M. H. Dzhumaev, P. A. Egorov |
| |
| Vol 9, No 2 (2025) |
Features of development of boil-off reciprocating compressors used in complexes for storage and transportation of liquid natural gas |
Abstract
PDF (Rus)
|
|
A. V. Burakov, A. A. Kotlov, L. G. Kuznetsov |
| |
| Vol 9, No 2 (2025) |
Obtaining gas dynamic characteristics of the circulation centrifugal compressor of hydrogen-containing gas based on the analysis of actual operating modes |
Abstract
PDF (Rus)
|
|
A. D. Vanyashov, D. V. Bychkov, A. V. Belikov |
| |
| Vol 9, No 2 (2025) |
Review of the application of geothermal heat pump systems in buildings |
Abstract
PDF (Rus)
|
|
Ali Deeb, A. N. Doroshin, Muhammad Deeb |
| |
| Vol 9, No 2 (2025) |
Experimental study of the features of the working processes of low-speed intensively cooled long-stroke piston compressor stages |
Abstract
PDF (Rus)
|
|
S. S. Busarov, A. V. Nedovenchany, R. E. Kobylskiy, I. S. Busarov |
| |
| Vol 9, No 2 (2025) |
Verification of mathematical model of transonic axial compressor stage |
Abstract
PDF (Rus)
|
|
A. S. Zolotukhin, L. N. Marenina, A. A. Drozdov, E. Yu. Zolotukhina, A. M. Yablokov |
| |
| Vol 9, No 1 (2025) |
Peculiarities of operating modes of booster piston compressors based on a low-speed long-stroke compressor stage in mobile compressor stations |
Abstract
PDF (Rus)
|
|
V. L. Yusha, S. S. Busarov |
| |
| Vol 9, No 1 (2025) |
Transient operating modes of fluid film thrust bearing of a compressor machine |
Abstract
PDF (Rus)
|
|
N. V. Sokolov, M. B. Khadiev, P. E. Fedotov, E. M. Fedotov |
| |
| Vol 9, No 1 (2025) |
Improving the efficiency of the resource-saving gas cooling system of the booster compressor unit as a part of the combined cycle plant |
Abstract
PDF (Rus)
|
|
I. A. Yanvarev, V. S. Vinichenko, I. S. Bozhko |
| |
| Vol 9, No 1 (2025) |
Detection of heat carrier losses in centralized heating systems |
Abstract
PDF (Rus)
|
|
V. Yu Grokhotov, A. G. Mikhailov, I. A. Stepashkin |
| |
| Vol 9, No 1 (2025) |
Movable blade systems of low specific speed centrifugal pumps |
Abstract
PDF (Rus)
|
|
K. E. Denisov, A. K. Liamasov |
| |
| Vol 9, No 1 (2025) |
Multi-criteria optimization of heat recovery unit in terms of the climatic factor |
Abstract
PDF (Rus)
|
|
V. A. Nikitina, A. B. Sulin, S. S. Muraveinikov, D. O. Dmitriev |
| |
| Vol 9, No 1 (2025) |
Construction of a computational model for the process of cooling down a cryogenic storage facility for liquefied natural gas |
Abstract
PDF (Rus)
|
|
Ya. E. Rodkin, A. B. Sulin |
| |
| Vol 9, No 1 (2025) |
Modelling, controlling and regulating the energy consumption of a hybrid vehicle |
Abstract
PDF (Rus)
|
|
Mohammad Tarraf, V. V. Gayevskiy, Muhammad Deeb |
| |
| Vol 9, No 1 (2025) |
Selection and study of methods for implementing a diagnostic model for compressor stations of the rocket and space complex |
Abstract
PDF (Rus)
|
|
A. V. Burakov, R. R. Khotsky, L. G. Kuznetsov |
| |
| Vol 8, No 4 (2024) |
On the variation of kinetic energy in a hydraulic inertial motion converter |
Abstract
PDF (Rus)
|
|
Yu. A. Burian, G. S. Russkikh |
| |
| Vol 8, No 4 (2024) |
Consideration of hydrodynamic forces in determining the force factors acting operating elements of a scroll compressor |
Abstract
PDF (Rus)
|
|
V. A. Pronin, A. V. Kovanov, E. N. Mikhailova, A. Yu. Zhilkin |
| |
| Vol 8, No 4 (2024) |
Evaluation of rational energy costs for liquid dispersion in piston compressors with a two-phase working fluid |
Abstract
|
|
V. E. Scherba, A. K. Kuzhbanov, M. I. Gildebrandt, V. Yu. Kudentsov, N. S. Galdin, A. A. Gladenko |
| |
| Vol 8, No 4 (2024) |
Analysis of the thermodynamic efficiency of a theoretical multi-stage compressor with the combined use of adiabatic, isothermal and subisothermal compression processes |
Abstract
PDF (Rus)
|
|
V. L. Yusha |
| |
| Vol 8, No 4 (2024) |
Aluminum-based material for use in hydrogen cartridges of the hydrogen fuel cell supply system |
Abstract
PDF (Rus)
|
|
A. I. Nizovskii, S. V. Belkova, L. O. Shtripling |
| |
| Vol 8, No 4 (2024) |
Influence of the extracorporeal membrane oxygenation system centrifugal pump operation mode on blood damage |
Abstract
PDF (Rus)
|
|
M. S. Isaeva, A. I. Petrov, Ye. P. Banin |
| |
| Vol 8, No 4 (2024) |
Improving the efficiency of adsorption filters with a short diffuser by improving their flow part |
Abstract
PDF (Rus)
|
|
A. S. Korneevа, N. Yu. Filkin |
| |
| Vol 8, No 4 (2024) |
Overview of results in the application of flywheel hybrid transportation systems |
Abstract
PDF (Rus)
|
|
Tarraf Mokhammad, V. V. Gayevskiy, Deeb Mukhammad |
| |
| Vol 8, No 3 (2024) |
Experience of applying 3D-scanning and CFD calculations to study and optimization the flow in the impeller of a multi-shaft centrifugal compressor |
Abstract
PDF (Rus)
|
|
E. V. Filimonov, L. N. Marenina, A. A. Drozdov, N. I. Sadovsky |
| |
| Vol 8, No 3 (2024) |
Experimental and theoretical study of the features of the amplitude-frequency response features of the anharmonic Duffing oscillator |
Abstract
PDF (Rus)
|
|
B. A. Kalashnikov, V. V. Bokhan, V. E. Smolko |
| |
| Vol 8, No 3 (2024) |
The assessment of applicability of single-stage piston long-stroke lowspeed compressors in low-temperature refrigeration machines |
Abstract
PDF (Rus)
|
|
V. L. Yusha, S. S. Busarov, A. V. Nedovenchany |
| |
| Vol 8, No 3 (2024) |
Adaptation of the performance control system of a technological piston hydrogen compressor to unstable operating conditions |
Abstract
PDF (Rus)
|
|
V. L. Yusha, M. A. Sutyaginskiy, Yu. A. Potapov, G. S. Russkikh |
| |
| Vol 8, No 3 (2024) |
Evaluation of the prospects for the use of single-stage centrifugal compressors based on high-pressure stages with an inlet guide device at linear gas compressor stations |
Abstract
PDF (Rus)
|
|
A. D. Vanyashov, V. V. Karabanova, A. A. Nefedov |
| |
| Vol 8, No 3 (2024) |
Mathematical modeling non-contact external compression pumps with different molecular weights gases |
Abstract
PDF (Rus)
|
|
A. A. Raykov, A. A. Isaev, A. V. Burmistrov |
| |
| Vol 8, No 3 (2024) |
Problematic issues and ways to solve them during reverse engineering of compressor design units |
Abstract
PDF (Rus)
|
|
A. F. Sarmanaeva, N. V. Sokolov, O. Yu. Paranina, V. V. Kuzovov, Yu. V. Sidorova, I. S. Davletshin, I. N. Lotfullin, M. V. Korshunov |
| |
| Vol 8, No 3 (2024) |
The influence of reality gas calculation methods on the gasdynamic characteristics of a gas pumping unit centrifugal compressor |
Abstract
PDF (Rus)
|
|
O. A. Solovyeva, I. S. Sharikov, N. I. Sadovsky |
| |
| Vol 8, No 2 (2024) |
The study of heat transfer intensification during boiling of a nanofluid on a heating surface with a nanorelief |
Abstract
PDF (Rus)
|
|
E. N. Slobodina, A. G. Mikhailov, E. A. Rogachev, A. M. Paramonov, E. A. Gass |
| |
| Vol 8, No 2 (2024) |
Consideration of the effect of manufacturing deviations from the shape of a multistage axial compressor |
Abstract
PDF (Rus)
|
|
A. S. Zolotukhin, E. I. Davletgareeva, F. A. Malyshev |
| |
| Vol 8, No 2 (2024) |
Selecting a method for reducing friction in rotary refrigeration compressors developed for import substitution |
Abstract
PDF (Rus)
|
|
N. A. Kudla, A. V. Burakov |
| |
| Vol 8, No 2 (2024) |
On the choice of the method of dynamic rationing of energy resources in oil refineries |
Abstract
PDF (Rus)
|
|
V. R. Vedruchenko, E. M. Rezanov, A. P. Starikov, A. V. Kushnarenko, P. A. Surovtsev, V. A. Kikhtenko |
| |
| Vol 8, No 2 (2024) |
The analysis of the main directions for reducing the intensity of mass flows of the working fluid through leaks in the working chamber of a piston long-stroke low-speed compressor stage |
Abstract
PDF (Rus)
|
|
V. L. Yusha, S. S. Busarov, A. V. Nedovenchany |
| |
| Vol 8, No 2 (2024) |
Reducing gas pressure pulsations in the suction line of a piston compressor when using throttle washers |
Abstract
PDF (Rus)
|
|
S. S. Busarov, A. A. Kapelyukhovskaya, V. V. Voronin, K. A. Bakulin, N. G. Sinitsin |
| |
| Vol 8, No 2 (2024) |
Problems of consistency of gas dynamic characteristics of centrifugal compressor sections and selection of anti-surge control valves |
Abstract
PDF (Rus)
|
|
A. D. Vanyashov, I. A. Yanvarev |
| |
| Vol 8, No 1 (2024) |
The Analysis of Thermal Performance of Radiation Life Support System Based on Experimental Data |
Abstract
PDF (Rus)
|
|
V. I. Karagusov, A. V. Zinovieva |
| |
| Vol 8, No 1 (2024) |
Theoretical assessment of the effectiveness of application single-stage long-stroke piston compressors in refrigeration and hydrocarbon gas liquefaction systems |
Abstract
PDF (Rus)
|
|
V. L. Yusha |
| |
| Vol 8, No 1 (2024) |
Prospects for creating modern piston compressors with increased performance |
Abstract
PDF (Rus)
|
|
S. S. Busarov, K. A. Bakulin, R. E. Kobylskiy, I. S. Busarov |
| |
| Vol 8, No 1 (2024) |
Conditionally dynamic analysis of the centrifugal compressor operation in the aggregate recirculation line |
Abstract
PDF (Rus)
|
|
A. D. Vanyashov |
| |
| Vol 8, No 1 (2024) |
Development of the mathematical model for heat recovery system for mobile compressor stations based on refrigeration machine |
Abstract
PDF (Rus)
|
|
G. I. Chernov, V. S. Evdokimov, A. M. Kalashnikov, V. I. Kabelskiy, A. O. Zhukov, V. A. Futin |
| |
| Vol 8, No 1 (2024) |
The comparative analysis of theoretical models for predicting thermal conductivity of nanofluid |
Abstract
PDF (Rus)
|
|
O. V. Vdovin, E. N. Slobodina, A. G. Mikhailov |
| |
| Vol 7, No 4 (2023) |
Method for assessing the theoretical characteristics of small axial hydraulic turbines |
Abstract
PDF (Rus)
|
|
D. V. Mylkin, A. V. Volkov, B. M. Orakhelashvili, A. A. Druzhinin, V. Yu. Lyapin |
| |
| Vol 7, No 4 (2023) |
The effect of wall mobility on mass flow in a slow-moving long-stroke stage |
Abstract
PDF (Rus)
|
|
A. G. Nikiforov, L. A. Muslova |
| |
| Vol 7, No 4 (2023) |
Assessment of the influence of gap wall mobility factor at calculation of leakage in working section of a scroll compressor. Part 2 |
Abstract
PDF (Rus)
|
|
V. A. Pronin, A. V. Kovanov, V. A. Tsvetkov, E. N. Mikhailova, P. A. Belov |
| |
| Vol 7, No 4 (2023) |
On the relationship of digital technological platforms of large chemical and oil refining industries with the technical appearance of the compressor equipment fleet |
Abstract
PDF (Rus)
|
|
V. L. Yusha, M. A. Sutyaginskiy, A. Yu. Gromov, P. V. Ushakov, Yu. A. Potapov |
| |
| Vol 7, No 4 (2023) |
Optimization of centrifugal compressor stages |
Abstract
PDF (Rus)
|
|
E. V. Dubinin, B. F. Idiyatullin, N. G. Khasanov |
| |
| Vol 7, No 3 (2023) |
Comparative evaluation of the energy and economic efficiency of vapor compression heat pumps in modernization of large chemical and oil refining industries. Part 2 |
Abstract
PDF (Rus)
|
|
V. L. Yusha, M. A. Sutyaginskiy, Yu. A. Potapov |
| |
| Vol 7, No 3 (2023) |
Methods and technologies for adaptation of main and auxiliary equipment of compressor plants and stations to unstable operating conditions |
Abstract
PDF (Rus)
|
|
A. D. Vanyashov, V. L. Yusha |
| |
| Vol 7, No 3 (2023) |
System analysis as a tool for implementing low–waste and waste–free production at oil and gas industry enterprises |
Abstract
PDF (Rus)
|
|
A. V. Kulbyakina, A. I. Savelyeva, N. A. Ozerov, P. A. Batrakov |
| |
| Vol 7, No 3 (2023) |
Calculation studies of heat transfer in the flow of nanofluids |
Abstract
PDF (Rus)
|
|
E. N. Slobodina, I. A. Stepashkin, D. V. Kovalenko, A. G. Mikhailov, E. A. Rogachev |
| |
| Vol 7, No 3 (2023) |
Modernization of the load gripping device for forestry industry |
Abstract
PDF (Rus)
|
|
A. N. Korolevskikh, O. A. Dvinskaya, E. A. Bogdanovа |
| |
| Vol 7, No 3 (2023) |
Synthesis of regularities of control of blocking properties of differential transmission mechanisms |
Abstract
PDF (Rus)
|
|
A. V. Popov, S. V. Ushnurtsev, A. V. Keller |
| |
| Vol 7, No 3 (2023) |
The analysis of single-stage piston compressors operation under various conditions |
Abstract
PDF (Rus)
|
|
A. G. Nikiforov, L. A. Muslova |
| |
| Vol 7, No 2 (2023) |
Study of thermal performance of a solar collector-based hydraulic system |
Abstract
PDF (Rus)
|
|
A. A. Gladenko, A. V. Zinovyeva, V. I. Karagusov |
| |
| Vol 7, No 2 (2023) |
The question of the efficiency of the workflow of loop propellers |
Abstract
PDF (Rus)
|
|
A. V. Mesropyan, Yu. A. Shabelnik |
| |
| Vol 7, No 2 (2023) |
The analysis of permissible radial clearance in a piston-cylinder seal |
Abstract
PDF (Rus)
|
|
A. G. Nikiforov, L. A. Muslova |
| |
| Vol 7, No 2 (2023) |
Adjustment of condensing temperature of the vapor-compression heat pump based on a reciprocating long-stroke compressor stage at fixed temperatures of receiving coolant |
Abstract
PDF (Rus)
|
|
V. L. Yusha, A. Yu. Gromov, P. V. Ushakov |
| |
| Vol 7, No 2 (2023) |
Comparative evaluation of the energy and economic efficiency of vapor compression heat pumps in modernization of large chemical and oil refining industries. Part 1 |
Abstract
PDF (Rus)
|
|
V. I. Yusha, M. A. Sutyaginskiy, Yu. A. Potapov |
| |
| Vol 7, No 2 (2023) |
Experimental study of tribological characteristics of promising self-lubricating materials for high-speed friction units |
Abstract
PDF (Rus)
|
|
N. A. Raikovskiy, A. M. Kalashnikov |
| |
| Vol 7, No 2 (2023) |
The model of working process of the boom lifting and lowering mechanism with an additional damper in the form of hydrodiode |
Abstract
PDF (Rus)
|
|
S. Yu. Kaigorodov |
| |
| Vol 7, No 2 (2023) |
On the potential of using nature-based technologies to improve the efficiency of blade hydro-machines |
Abstract
PDF (Rus)
|
|
G. A. Kromm, A. V. Volkov, A. V. Ryzhenkov, V. Yu. Lyapin, E. S. Trushin |
| |
| Vol 7, No 1 (2023) |
Assessment of the influence of gap wall mobility factor at calculation of leakage in working section of a scroll compressor. Part 1 |
Abstract
PDF (Rus)
|
|
V. A. Pronin, A. V. Kovanov, V. A. Tsvetkov, E. N. Mikhailova, E. A. Kalashnikova |
| |
| Vol 7, No 1 (2023) |
The analysis of influence of temperature conditions of piston long-stroke compressor stage on thermodynamic efficiency of a heat pump |
Abstract
PDF (Rus)
|
|
V. L. Yusha, A. Yu. Gromov, P. V. Ushakov |
| |
| Vol 7, No 1 (2023) |
The method of calculating the lobe wall thickness of cuff cylinder piston seal |
Abstract
PDF (Rus)
|
|
S. S. Busarov, R. E. Kobylsky, A. Yu. Gromov |
| |
| Vol 7, No 1 (2023) |
The analysis of pumpless cooling systems reciprocating compressors |
Abstract
PDF (Rus)
|
|
E. A. Dorofeev, A. S. Tegzhanov, V. E. Shcherba |
| |
| Vol 7, No 1 (2023) |
The analysis of methods for calculating seals of hybrid power machines |
Abstract
PDF (Rus)
|
|
E. A. Pavlyuchenko, A. S. Tegzhanov, V. E. Shcherba, E. A. Lysenko, A. K. Kuzhbanov |
| |
| Vol 7, No 1 (2023) |
Technique for designing and optimization of the francis turbine blade system |
Abstract
PDF (Rus)
|
|
M. Omran, A. A. Zharkovskiy, V. A. Schur, D. G. Svoboda |
| |
| 1 - 98 of 98 Items |
|
