Obtaining gas dynamic characteristics of the circulation centrifugal compressor of hydrogen-containing gas based on the analysis of actual operating modes
https://doi.org/10.25206/2588-0373-2025-9-2-33-40
EDN: NISWJO
Abstract
The analysis of actual operating modes of a centrifugal compressor providing circulation of hydrogen-containing gas in a reactor block of catalytic isomerization of metaxylene and ethylbenzene into orthoxylenes and paraxylenes has been performed. The technological process, as well as the state and properties of the catalyst in the reactor block determine the concentration of hydrogen and the molecular weight of the gas mixture, which, accordingly, leads to the need to regulate the operating modes of the centrifugal compressor by throttling at the suction. The calculation method of the gas-dynamic characteristics of the compressor when regulating by throttling at the suction has been clarified, taking into account the features of operation in the circulation mode, namely, the change in pressure before the throttling device. It has been established that when regulating by throttling at the suction of a circulation centrifugal compressor, the function of the pressure ratio on the volumetric productivity changes. It is established that the actual surge limit is shifted relative to the theoretical limit to the left, into the zone of the descending part of the pressure characteristic.
About the Authors
A. D. VanyashovRussian Federation
Aleksandr D. Vanyashov – Candidate of Technical Sciences, Associate Professor, Associate Professor of the Refrigeration and Compressor Equipment and Technology Department, Omsk State Technical University.
Omsk, Mira Ave., 11, 644050
AuthorID (RSCI) 285096
AuthorID (SCOPUS) 8300390600
D. V. Bychkov
Russian Federation
Danil V. Bychkov - Chief Specialist of the Reliability Department, JSC “Gazpromneft-ONPZ”.
Omsk, Gubkin Ave., 1, 644040
A. V. Belikov
Russian Federation
Alexander V. Belikov - Head of the Reliability Department, JSC “Gazpromneft-ONPZ”.
Omsk, Gubkin Ave., 1, 644040
References
1. Den G. N. Proyektirovaniye protochnoy chasti tsentrobezhnykh kompressorov [Design of centrifugal compressors flow part]. Leningrad, 1980. 232 р. (In Russ.).
2. Ris V. F. Tsentrobezhnyye kompressornyye mashiny [Centrifugal compressors]. Leningrad, 1981. 351 р. (In Russ.).
3. Chistyakov F. M., Ignatenko V. V., Romanenko N. T., Frolov E. S. Tsentrobezhnyye kompressornyye mashiny [Centrifugal compressors]. Moscow, 1969. 327 p. (In Russ.).
4. Evdokimov V. E. Optimal’nyy sposob regulirovaniya kompressorov obshchego naznacheniya [Optimum control method for general purpose compressors]. Energeticheskoye Mashinostroyeniye. Ekspress-informatsiya. Moscow, 1980. Issue 1. P. 1–4. (In Russ.).
5. Kucherenko V. V., Gogolev P. V. Povysheniye effektivnosti ekspluatatsii kompressorov K-250 i K-500 [Raising the operating efficiency of K-250 and K-500 compressors]. Kompressornaya tekhnika i pnevmatika. Compressor Technology and Pneumatics. 2004. No. 7. P. 6–9. (In Russ.).
6. Arkhipov V. V., Lysyuk V. I., Chernin M. E. Issledovaniye i razrabotka nagnetatelya prirodnogo gaza s effektivnym regulirovaniyem gazodinamicheskikh kharakteristik [Research and development of a natural gas blower with efficient control of gas dynamic features]. Kompressornaya tekhnika i pnevmatika. Compressor Technology and Pneumatics. 2004. No. 1. P. 5–7. (In Russ.).
7. Baykov I. R., Fayrushin Sh. Z., Kitayev S. V., Kolotilov Yu. V. Povysheniye energeticheskoy effektivnosti raboty tsentrobezhnykh kompressorov bol’shoy moshchnosti na primere neftepererabatyvayushchego zavoda [Raising energy efficiency of centrifugal compressors with high power by the example of oil refinery]. Transport i khraneniye nefteproduktov i uglevodorodnogo syr’ya. Transport and Storage of Oil Products and Hydrocarbons. 2016. No. 1. P. 31–35. EDN: XAGILL. (In Russ.).
8. Guzelbayev Ya. Z., Ibragimov E. R., Livshits B. M., Lunev A. T. Plyusy i minusy modernizatsii elektroprivodnykh GPA s primeneniyem chastotno-reguliruyemogo privoda [Pros and cons of modernisation of electric-drive GCUs with variable frequency drive]. Gazovaya promyshlennost’. Gas Industry. 2014. No. 12 (715). P. 59–61. EDN: TJUQUZ. (In Russ.).
9. Bentaleb T., Cacitti A., Franciscis S. De, Garulli A. Model Predictive Control for pressure regulation and surge prevention in centrifugal compressors. 2015 European Control Conference (ECC). 2015. P. 3346–3351. DOI: 10.1109/ECC.2015.7331051.
10. Mirsky S., Jacobson W., Tiscornia D. [et al.]. Development and design of antisurge and performance control system for centrifugal compressor. Proceedings of the 42nd Turbomachinery and 29th Pump Symposium. 2013. URL: https://core.ac.uk/download/pdf/147258448.pdf (accessed: 10.02.2025).
11. JacobsonW., ZaghloulM., TolmatskyM. [et al.]. Compressor loadsharing control and surge detection techniques. Proceedings of the 45th Turbomachinery and 32nd Pump Symposium. 2016. URL: https://core.ac.uk/download/pdf/147252842.pdf (accessed: 10.02.2025).
12. Vorontsov M. A., Glazunov V. Yu., Lopatin A. S. Matematicheskoye modelirovaniye rezhimov raboty vysokonapornogo mnogostupenchatogo tsentrobezhnogo kompressora [Mathematical modeling of operation modes of a high pressure multistage centrifugal compressor]. Transport i khraneniye nefteproduktov i uglevodorodnogo syr’ya. Transport and Storage of Oil Products and Hydrocarbons. 2016. No. 1. P. 25–30. EDN: NUYPLV. (In Russ.).
13. Vanyashov A. D., Borodikhin I. A., Zaripov V. A. [et al.]. Nekotoryye rezul’taty postupenchatogo perescheta gazodinamicheskikh kharakteristik tsentrobezhnykh kompressorov na trebuyemyye usloviya ekspluatatsii [Some incremental recalculation of gasodynamic performance of centrifugal compressors on involving conditions of exploitation]. Kompressornaya tekhnika i pnevmatika. Compressor Technology and Pneumatics. 2011. No. 7. P. 32–37. EDN: OJXVNT. (In Russ.).
14. Vanyashov A. D. Primeneniye metodov perescheta gazodinamicheskikh kharakteristik mnogostupenchatykh i mnogosektsionnykh turbokompressorov na drugiye usloviya raboty v razlichnykh tekhnologicheskikh ustanovkakh [Application of methods of recalculation of gasdynamic characteristics of multi-staged and multisection turbocompressors on other conditions of work in various technological installations]. Omskiy nauchnyy vestnik. Ser. Aviatsionno-raketnoye i energeticheskoye mashinostroyeniye. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2018. Vol. 2, no. 1. P. 42–52. DOI: 10.25206/2588-0373-2018-2-1-42-52. EDN: UOIYEU. (In Russ.).
15. Vanyashov A. D., Yusha V. L. Metody i tekhnologii adaptatsii osnovnogo i vspomogatel’nogo oborudovaniya kompressornykh ustanovok i stantsiy k nestabil’nym usloviyam ekspluatatsii [Methods and technologies for adaptation of main and auxiliary equipment of compressor plants and stations to unstable operating conditions]. Omskiy nauchnyy vestnik. Ser. Aviatsionno-raketnoye i energeticheskoye mashinostroyeniye. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2023. Vol. 7, no. 3. P. 24–35. DOI: 10.25206/2588-0373-2023-7-3-24-35. EDN: JMGPPK. (In Russ.).
Review
For citations:
Vanyashov A.D., Bychkov D.V., Belikov A.V. Obtaining gas dynamic characteristics of the circulation centrifugal compressor of hydrogen-containing gas based on the analysis of actual operating modes. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2025;9(2):33-40. (In Russ.) https://doi.org/10.25206/2588-0373-2025-9-2-33-40. EDN: NISWJO
JATS XML
















