Design and manufacture of parts and assemblies of aerospace structures made of composite materials in conditions of additive manufacturing

This article raises the topic of modernization of existing technological processes of procurement production in terms of eliminating the expensive and lengthy stage of designing and manufacturing metal molds and the introduction of 3D printing technologies. The article provides information about 3D printing technology based on the extrusion method. Information is provided on the main stages of designing the tooling for the «Insert» part, taking into account the features and limitations associated with printing on 3D printers. As part of the study, the roughness and shrinkage of test samples are analyzed, which are made on a 3D printer from various composite materials.

1. Vdovin R. A., Balyakin A. V., Goncharov E. S. Sovremennyye tekhnologii pri proizvodstve krupnogabaritnykh otlivok detaley GTD [Modern technologies in the production of large-size castings of GTE parts]. Samara, 2022. 112 p. ISBN 978-5-7883- 1853-0. (In Russ.).

2. Vdovin R. A. Razrabotka i vnedreniye v proizvodstvo tsifrovoy gibridnoy tekhnologii izgotovleniya lopatok GTD na osnove metodov bystrogo prototipirovaniya [Development and deployment of a digital hybrid gte blades manufacturing technique on the basis of fast prototyping methods] // Vestnik RGATU imeni P. A. Solov’yeva. Vestnik of P. A. Solovyov Rybinsk State Aviation Technical University. 2019. No. 4 (51). P. 47–52. EDN: QDLSDO. (In Russ.).

3. Yablochnikov E. I., Gribovskiy A. A., Pirogov A. V. Effektivnost’ primeneniya additivnykh tekhnologiy dlya izgotovleniya lit’yevykh form i pri podgotovke proizvodstva izdeliy iz termoplastichnykh polimernykh materialov [Efficiency of using additive technologies for the manufacture of injection molds and in preparing the production of products from thermoplastic polymer materials] // Metalloobrabotka. Metalloobrabotka. 2013. No. 5–6. P. 74–80. (In Russ.).

4. Bayu K. R., Ariawan I. F., Dody U. A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters // Open Engineering. 2021. Vol. 11, no. 1. P. 639–649. DOI: 10.1515/eng-2021-0063. (In Engl.).

5. Vaezi M., Chianrabutra S., Mellor B. [et al.]. Multiple material additive manufacturing – Part 1: a review // Virtual and Physical Prototyping. 2013. Vol. 8 (1). Р. 19–50. DOI: 10.1080/17452759.2013.778175. (In Engl.).

6. Lopatin A. N., Zverkov I. D. Izgotovleniye formoobrazuyushchey osnastki additivnymi metodami dlya kompozitnykh detaley [Shaping molding tools roduction for composite parts by means of additive technologies] // Aviatsionnyye materialy i tekhnologii. Aviation Materials and Technologies. 2019. No. 2 (55). P. 53–59. DOI: 10.18577/2071-9140-2019-0-2-53-59. EDN: ZIIYWT. (In Russ.).

7. Balyakin A. V., Goncharov E. S., Zlobin E. P. Analiz tekhnologicheskikh vozmozhnostey i ogranicheniy 3d printerov dlya izgotovleniya prototipov GTU [Analysis of technological capabilities and limitations of 3D printers for GTU prototype production] // Vserossiyskiy nauchno-tekhnicheskiy forum po dvigatelyam i energeticheskim ustanovkam imeni N. D. Kuznetsova, posvyashchennyy 110-letiyu PAO «ODKKUZNETsOV». All-Russian Scientific and Technical Forum for ngines and Power Facilities named after N. D. Kuznetsov. Samara, 2022. P. 20–22. EDN: NTBMQY. (In Russ.).

8. Doshi M., Mahale A., Singh S. K. Printing parameters and materials affecting mechanical properties of FDM-3D printed Parts: Perspective and prospects. // Materials Today: Proceedings. 2022. Vol. 50 (5). P. 2269–2275. (In Engl.).

9. Pérez M., Medina-Sánchez G., García-Collado A. [et al.]. Surface Quality Enhancement of Fused Deposition Modeling (FDM) Printed Samples Based on the Selection of Critical Printing Parameters // Materials. 2018. Vol. 1 (8). DOI: 10.3390/ma11081382. (In Engl.).

10. Wang T.-M., Xi J.-T., Jin Y. A model research for prototype warp deformation in the FDM process // Journal of Additive Manufacturing Technology. 2007. Vol. 33 (11). Р. 1087– 1096. DOI: 10.1007/s00170-006-0556-9. (In Engl.).

11. Huang Q., Marshall G. S., Epstein D. J. An Analytical Foundation for Optimal Compensation of Three-Dimensional Shape Deformation in Additive Manufacturing // Journal of Manufacturing Science and Engineering. 2016. Vol. 138. P. 061010-1. DOI: 10.1115/1.4032220. (In Engl.).