Methods and technologies for adaptation of main and auxiliary equipment of compressor plants and stations to unstable operating conditions
https://doi.org/10.25206/2588-0373-2023-7-3-24-35
EDN: JMGPPK
Abstract
The hierarchical structure of the compressor industry facilities is presented, taking into account their interaction and mutual influence. Analysis of production facilities that implement the gas compression technology, unstable operating conditions, the cause and nature of their occurrence, the degree of influence on the impact on facilities of different levels was performed. The technologies of adaptation of compressor equipment to unstable operating conditions are systematized, at the same time, depending on the emerging tasks, adaptation technologies are divided into stages (levels) of implementation. Present problems of scientific and methodological nature on implementation of technologies of adaptation of compressor equipment to unstable operating conditions at different levels of hierarchical structure of facilities are shown.
About the Authors
A. D. Vanyashov
Omsk State Technical University
Russian Federation
Russian Federation
Vanyashov Aleksandr Dmitriyevich, Candidate of Technical Sciences, Associate Professor of Refrigeration and Compressor Engineering and Technology Department
AuthorID (RSCI): 285096
AuthorID (SCOPUS): 8300390600
Omsk, Mira Ave., 11, 644050
V. L. Yusha
Omsk State Technical University
Russian Federation
Russian Federation
Yusha Vladimir Leonidovich, Doctor of Technical Sciences, Professor
AuthorID (SCOPUS): 6505861937
ResearcherID: J-8079-2013
Omsk, Mira Ave., 11, 644050
References
1. GOST 28567-90. Kompressory. Terminy i opredeleniya [Compressors. Terms and Definitions]. Moscow, 2005. 20 p. (In Russ.).
2. Onuchin M. F. O terminologii v kompressornoy tekhnike [About terminology in compressor technology] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 1996. No. 10-11. P. 109–116. (In Russ.).
3. Safin A. Kh. Osnovy sovremennoy klassifikatsii i terminologii kompressornogo oborudovaniya. Chast’ 1. Konstruktivnaya klassifikatsiya kompressorov [Bases of modern classification and terminology of the compressor equipment. Part 1. Constructive classification of compressors] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2008. No. 4. P. 29–31. EDN: JUMXFP. (In Russ.).
4. Safin A. Kh. Osnovy sovremennoy klassifikatsii i terminologii kompressornogo oborudovaniya. Chast’ 2. Funktsional’no-strukturnaya klassifikatsiya oborudovaniya [Fundamentals of modern compressor equipment classification and terminology. Part 2. Functional and structural equipment classification] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2008. No. 6. P. 32–41. EDN: JVOIDT. (In Russ.).
5. Safin A. Kh. Osnovy sovremennoy klassifikatsii i terminologii kompressornogo oborudovaniya. Chast’ 3. Konstruktivnaya i konstruktivnotekhnologicheskaya klassifikatsiya agregatirovannogo i komplektnogo oborudovaniya [Basics of modern classification and terminology of compressor equipment. Part 3. Design and technological classification of units and complex equipment] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2008. No. 7. P. 31–37. EDN: JUYDDF. (In Russ.).
6. Ris V. F. Tsentrobezhnyye kompressornyye mashiny [Centrifugal compressor machines]. 3rd ed., revised and additional. Leningrad, 1981. 351 p. (In Russ.).
7. Den G. N. Proyektirovaniye protochnoy chasti tsentrobezhnykh kompressorov [Designing the flow path of centrifugal compressors]. Leningrad, 1980. 232 p. (In Russ.).
8. Shnepp V. B. Konstruktsiya i raschлt tsentrobezhnykh kompressornykh mashin [Design and calculation of centrifugal compressor machines]. Moscow, 1995. 240 p. (In Russ.).
9. Khisameev I. G., Maksimov V. A., Batkis G. S. [et al.]. Proyektirovaniye i ekspluatatsiya promyshlennykh tsentrobezhnykh kompressorov [Design and operation of industrial centrifugal compressors]. Kazan, 2010. 671 p. ISBN 978-5-9690-0111-4. (In Russ.).
10. Galerkin Yu. B. Sovershenstvovaniye metoda universal’nogo modelirovaniya i razvitiye opyta optimal’nogo gazodinamicheskogo proyektirovaniya promyshlennykh tsentrobezhnykh kompressorov [Improvement of the method of universal modeling and development of experience in optimal gas-dynamic design of industrial centrifugal compressors] // Tr. XIV Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii po kompressornoy tematike. Proceedings of the XIV International Scientific and Technical Conference on Compressor Theme. Kazan, 2007. P. 276–286. (In Russ.).
11. Yun V. K., Zuev A. V. Razrabotka sistemy avtomatizirovannogo proektirovaniya tsentrobezhnykh kompressorov [The development of computer-aided design centrifugal compressors] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2016. No. 2. P. 25–30. EDN: VTKIJR. (In Russ.).
12. Lyubimov A. N., Evdokimov V. E., Semakov A. V. [et al.]. Ob ispol’zovanii eksperimental’nogo i raschetnykh metodov pri proektirovanii protochnykh chastey tsentrobezhnykh kompressorov [About the experimental and computational methods of centrifugal compressors flow part design] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2014. No. 6. P. 12–20. EDN: TABOLJ. (In Russ.).
13. Den G. N., Soloviev V. G. Nekotoryye rezul’taty issledovaniy protochnykh chastey TsKM s vkhodnymi reguliruyushchimi apparatami [Some results of studies of the flow parts of the CCM with inlet control devices] // Energomashinostroyeniye. Energomashinostroyeniye. 1971. No. 7. P. 19–23. (In Russ.).
14. Kondratov V. N., Solovyev V. G. Optimal’nyye rezhimy raboty stupeni tsentrobezhnogo kompressora s vkhodnym reguliruyushchim apparatom [Optimal operating modes of a centrifugal compressor stage with an input control device] // Energomashinostroyeniye. Energomashinostroyeniye. 1989. No. 1. P. 14–15. (In Russ.).
15. Bukharin N. N., Voroshnin D. V., Korotkov A. V. [et al.]. Osobennosti techeniya i struktura potoka vo vkhodnom reguliruyushchem apparate tsentrobezhnogo kholodil’nogo kompressora [Features of the flow and structure of the flow in the inlet control apparatus of the centrifugal refrigeration compressor] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2006. No. 1. P. 8–11. (In Russ.).
16. Bondarenko G. A., Yurko I. V. Chislennoye modelirovaniye regulirovaniya raboty tsentrobezhnogo kompressora s vkhodnym reguliruyushchim apparatom [Numerical simulation of the regulation of the operation of a centrifugal compressor with an inlet control device] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2011. No. 3. P. 10–15. (In Russ.).
17. Mohseni A., Goldhahn E., Van den Braembussche R. A. [et al.]. Novel IGV designs for centrifugal compressors and their interaction with the impeller // Journal of Turbomachinery. 2012. Vol. 134 (2). P. 021006-1–021006-8. DOI: 10.1115/1.4003235. (In Engl.).
18. Sezal I., Chen N., Aalburg C. [et al.]. Introduction of Circumferentially Non-Uniform Variable Guide Vanes in the Inlet Plenum of a Centrifugal Compressor for Minimum Losses and Flow Distortion // Journal of Turbomachinery. 2016. Vol. 138 (9). P. 091008-1–091008-10. DOI: 10.1115/1.4032884. (In Engl.).
19. Coppinger M., Swain E. Performance Prediction of an Industrial Centrifugal Compressor Inlet Guide Vane System // Proc. of the Institution of Mechanical Engineers. Part A: Journal of Power and Energy. 2000. Vol. 214, Issue 2. P. 153–164. DOI: 10.1243/0957650001538254. (In Engl.).
20. Boehle M., Cagna M., Itter L. Compressible Flow in Inlet Guide Vanes with Mechanical Flaps // ASME Turbo Expo 2004: Power for Land, Sea, and Air. 2004. P. 1–9. DOI: 10.1115/GT2004-53191. (In Engl.).
21. Grimaldi A., Michelassi V. The Impact of Inlet Distortion and Reduced Frequency on the Performance of Centrifugal Compressors // Journal of Engineering for Gas Turbines and Power. 2019. Vol. 141 (2). P. 021012-1–021012-9. DOI: 10.1115/1.4040907. (In Engl.).
22. Zavalny P. N., Revzin B. S., Tarasov A. V. O ratsional’nom ispol’zovanii tsentrobezhnykh kompressornykh mashin v mnogonitochnykh gazotransportnykh sistemakh [On the rational use of centrifugal compressor machines in multi-line gas transmission systems] // Potrebiteli-proizvoditeli kompressorov i kompressornogo oborudovaniya. Consumers-manufacturers of Compressors and Compressor Equipment. Saint Petersburg, 1997. P. 153–156. (In Russ.).
23. Ognev V. V., Shchurovsky V. A., Salnikov S. Yu. [et al.]. Sravnitel’naya otsenka vysokonapornykh tsentrobezhnykh kompressorov [Comparative evaluation of high-pressure centrifugal compressors] // Gazoturbinnyye tekhnologii. Gas Turbo Technology. 2008. No. 5 (66). P. 24–26. EDN: JTLBPT. (In Russ.).
24. Vorontsov M. A., Grachev A. S., Gracheva O. A. [et al.]. Analiz funktsional’noy nadezhnosti raboty dozhimnykh kompressornykh stantsiy pri otklonenii fakticheskikh pokazateley ekspluatatsii ot proyektnykh znacheniy. Metodicheskiy podkhod i prakticheskaya znachimost’ [Analysis of the functional reliability of the operation of booster compressor stations when the actual performance indicators deviate from the design values. Methodological approach and practical significance] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2023. No. 1. P. 32–41. (In Russ.).
25. Kalinin A. F. Effektivnost’ otklyucheniya kompressornykh tsekhov i kompressornykh stantsiy [Shutdown efficiency of compressor shops and compressor stations] // Gazovaya promyshlennost’. GAS Industry of Russia. 2004. No. 11. P. 33–35. EDN: HRYKBF. (In Russ.).
26. Kalinin A. F. Sopostavleniye i vybor optimal’nykh skhem komprimirovaniya prirodnogo gaza na KS [Comparison and selection of optimal schemes for natural gas compression at compressor stations] // Gazovaya promyshlennost’. GAS Industry of Russia. 2004. No. 3. P. 55–57. EDN: HRYHGN. (In Russ.).
27. Mikaelyan E. A. Issledovaniye effektivnosti raboty gazoturbinnykh GPA v usloviyakh nizkonapornoy tekhnologii transporta gaza [Study of the efficiency of operation of gas turbine gas compressor units in the conditions of low-pressure gas transport technology] // Gazoturbinnyye tekhnologii. Gas Turbo Technology. 2014. No. 7 (126). P. 40–44. EDN: XYEMTR. (In Russ.).
28. Yun V. K. K voprosu ispytaniy mnogostupenchatykh tsentrobezhnykh kom-pressornykh mashin [On the issue of testing multi-stage centrifugal compressor machines] // Potrebiteli-proizvoditeli kompressorov i kompressornogo oborudovaniya. Consumers-manufacturers of Compressors and Compressor Equipment. Saint Petersburg, 2006. P. 144–150. (In Russ.).
29. Shameko S. L., Luybimov A. N., Gaman E. V. K pereschetu gazodinamicheskikh kharakteristik mnogostupenchatoy protochnoy chasti TSKM na inye usloviya raboty [To the gas dynamic characteristics conversion of the centrifugal compressor multistage setting from some conditions to other ones] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2010. No. 3. P. 28–31. EDN: MTDJAV. (In Russ.).
30. Primak A. N. Pereschet gazodinamicheskikh kharakteristik stupeney i mnogostupenchatykh sektsiy tsentrobezhnykh kompressorov [The conversion of gas-dynamic characteristics of sections and multisection centrifugal compressors] // Mekhanizatsiya stroitel’stva. Mechanization of Construction. 2012. No. 7 (817). P. 44–48. EDN: OZISLX. (In Russ.).
31. Vorontsov M. A., Glazunov V. Yu., Lopatin A. S. Matematicheskoe modelirovanie rezhimov raboty vysokonapornogo mnogostupenchatogo tsentrobezhnogo kompressora [Mathematical modeling of operation modes of a high pressure multistage centrifugal compressor] // Transport i khraneniye nefteproduktov i uglevodorodnogo syr’ya. Transport and Storage of Oil Products and Hydrocarbons. 2016. No. 1. P. 25–30. EDN: NUYPLV. (In Russ.).
32. Kildiyarov S. S. Razrabotka metoda perescheta gazodinamicheskikh kharakteristik mnogostupenchatykh tsentrobezhnykh kompressorov na dozhimnykh kompressornykh stantsiyakh [Development of a method for calculating gas-dynamic characteristics of multistage central-stage compressors at booster compressor stations] // Transport i khraneniye nefteproduktov i uglevodorodnogo syr’ya. Transport and Storage of Oil Products and Hydrocarbon Materials. 2022. No. 5–6. P. 28–31. DOI: 10.24412/0131-4270-2022-5-6-28-31. EDN: XJBBMB. (In Russ.).
33. Wang Z. T., Li Y. G., Meng H. [et al.]. Method of extrapolating low speed compressor curves based on improved similarity laws // ASME Turbo Expo. 2015. Vol. 3. DOI: 10.1115/GT2015-44108. (In Engl.).
34. Li X. P., Zhuo M. H., Lv B. P. [et al.]. Development and application of performance conversion software for centrifugal compressor // Oil & Gas Storage and Transportation. 2013. Vol. 32. P. 824–828. (In Engl.).
35. Albusaidi W., Pilidis P. An Iterative Method to Derive the Equivalent Centrifugal Compressor Performance at Various Operating Conditions: Part I: Modelling of Suction Parameters Impact // Energies. 2015. Vol. 8. P. 8497–8515. 8497-8515. DOI: 10.3390/en8088497. (In Engl.).
36. Swain E. A simple method for predicting centrifugal compressor performance characteristics // Proceedings of IMechE Conference. 1990. C405/040. (In Engl.).
37. Glushkov B. K., Selyanskaya E. L., Kasyanov S. V. Metodicheskiye voprosy obrabotki rezul’tatov gazodinamicheskikh ispytaniy nagnetateley i SPCh na vozdukhe i prirodnom gaze [Methodological issues of processing the results of gas-dynamic tests of superchargers and SFCs in air and natural gas] // Potrebiteli-proiz-voditeli kompressorov i kompressornogo oborudovaniya. Consumers-manufacturers of Compressors and Compressor Equipment. Saint Petersburg, 2002. P. 186–190. (In Russ.).
38. Lapitskiy A. E., Kozahenko L. E., Korolev A. A., Terentev E. A., Zdorov A. V. Osobennosti zavodskikh (stendovykh) i ekspluatatsionnykh ispytaniy tsentrobezhnykh gazovykh kompressorov [Features factory (poster) and operational tests of centrifugal gas compressors] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2015. No. 6. P. 10–17. EDN: OHMUFL. (In Russ.).
39. Semushkin A.V, Chernikova E., Schurovskiy V. A. Ob unifikatsii programm i metodik priyemo-sdatochnykh ispytaniy gazovykh kompressorov, primenyayemykh na ob”yektakh OAO «Gazprom» [On the unification of programs and methods for acceptance tests of gas compressors used at the facilities of OAO Gazprom] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2015. No. 3. P. 9–11. EDN: TTAAPB. (In Russ.).
40. PR 51-31323949-43-99. Metodicheskiye ukazaniya po provedeniyu teplotekhnicheskikh i gazodinamicheskikh raschetov pri ispytaniyakh gazoturbinnykh gazoperekachivayushchikh agregatov [Guidelines for conducting heat engineering and gas-dynamic calculations during testing of gas turbine gas compressor units]. Moscow, 1999. 26 p. (In Russ.).
41. Akimov V. I., Bakiyev T. A., Skrynnikov S. V. [et al.]. Obespecheniye vibroustoychivosti tekhnologicheskikh truboprovodov puskovogo kontura KS [Ensuring vibration resistance of technological pipelines of the CS start-up circuit] // Gazovaya promyshlennost’. GAS Industry of Russia. 2015. No. 8 (726). P. 56–59. EDN: UZMVAB. (In Russ.).
42. Shpotakovskiy M. M. Optimizatsiya rezhimov raboty ustanovok vozdushnogo okhlazhdeniya gaza na KS [Optimization of operation modes of air gas cooling unit at CS] // Gazovaya promyshlennost’. GAS Industry of Russia. 2005. No. 11. P. 51–53. EDN: HRYOWZ. (In Russ.).
43. Kazakevich V. V. Avtokolebaniya (pompazh) v kompressorakh [Self-oscillations (surging) in compressors]. 2rd ed., revised and additional. Moscow, 1974. 264 p. (In Russ.).
44. Kustikov G. G. Eksperimental’naya ustanovka dlya issledovaniya gazodinamicheskoy ustoychivosti turbokompressornykh sistem [Experimental setup for studying the gas-dynamic stability of turbocompressor systems] // Povysheniye effektivnosti kholodil’nykh i kompressornykh mashin. Improving the Efficiency of Refrigeration and Compressor Machines. Omsk, 1982. P. 50–54. (In Russ.).
45. Den G. N., Kustikov G. G., Potapov Yu. A. Polucheniye neustoychivogo uchastka kharakteristiki tsentrobezhnoy stupeni i opredeleniye granitsy pompazha [Obtaining an unstable section of the centrifugal stage characteristic and determining the surge boundary] // Kholodil’nyye mashiny i termotransformatory. Refrigerators and Thermotransformers. Leningrad, 1985. P. 14–21. (In Russ.).
46. Izmaylov R. A., Lebedev A. A. Postroyeniye sistemy zashchity tsentrobezhnogo kompressora ot pompazha na osnove analiza signalov i sovremennykh metodov chislennogo modelirovaniya gazodinamiki [The building protection system of centrifugal compressor from surging, based on the analysis of signals and modern methods of numerical simulation of gas dynamics] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2015. No. 1. P. 26–31. EDN: TPIPRZ. (In Russ.).
47. Guzelbaev Ya. Z., Khavkin A. L., Khusnutdinov I. F. Integrirovannye sistemy zashchity tsentrobezhnykh kompressorov ot pompazha [Integrated systems for protecting centrifugal compressors from surging] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2017. No. 4. P. 34–38. EDN: YNMIBP. (In Russ.).
48. Guzelbaev Ya. Z. Nekotoryye osobennosti dinamicheskikh svoystv tsentrobezhnykh kompressorov i seti [Some features of the dynamic properties of centrifugal compressors and networks] // Potrebiteli-proizvoditeli kompressorov i kompressornogo oborudovaniya. Consumers-manufacturers of Compressors and Compressor Equipment. Saint Petersburg, 2008. P. 191–196. (In Russ.).
49. Shchurovsky V. A. Osobennosti staticheskoy i dinamicheskoy rabotosposobnosti TsBK i gazotransportnoy seti [Features of static and dynamic performance of centrifugal compressors and gas transmission network] // Potrebiteli-proizvoditeli kompressorov i kompressornogo oborudovaniya. Consumers-manufacturers of Compressors and Compressor Equipment. Saint Petersburg, 2013. P. 53–58. (In Russ.).
50. Simonov A. M., Smagorinskiy A. M. Raschet parametrov oseradial’nykh rabochikh koles vysokonapornykh stupeney statsionarnykh tsentrobezhnykh kompressorov [Computation of parameters of axial-radial compressor wheels for high-pressure stages of stationary centrifugal compressors] // Kompressornaya tekhnika i pnevmatika. Compressors & Pneumatics. 2012. No. 5. P. 35–41. EDN: PFQMPB. (In Russ.).
Review
For citations:
Vanyashov A.D., Yusha V.L. Methods and technologies for adaptation of main and auxiliary equipment of compressor plants and stations to unstable operating conditions. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2023;7(3):24-35. (In Russ.) https://doi.org/10.25206/2588-0373-2023-7-3-24-35. EDN: JMGPPK
Views:
17
JATS XML
Email this article 