Studies of the design layout of resistojet with porous structure for propulsion systems of small spacecraft
https://doi.org/10.25206/2588-0373-2023-7-1-55-60
Abstract
The results of experimental studies on nitrogen with an overpressure of 0,02 MPa resistojet propulsion system of a small spacecraft with a porous structure weighing 45 g and an autonomous heating element with a radius of 3 mm with a power consumption of up to 60 watts for a warm-up time of up to 300 s are presented. The possibility of using a porous structure as a volumetric fuel gas pipeline with an increase in heat transfer intensity has been experimentally proved and the actual specific heat capacity of the porous structure has been determined. Taking into account the actual specific heat capacity, theoretical studies of the mass and geometry of the porous structure in the resistojet composition are carried out, optimal with respect to the autonomous heating element used by the power and the amount of fuel heating in the range (573–1273) K. Taking into account the radius of the heating element, the fuel temperature range (573–973) K corresponding to the optimal masses and radii of the porous structure for the formation of the resistojet design layout is determined.
About the Authors
V. N. Blinov
Omsk State Technical University
Russian Federation
Russian Federation
Lukyanchik Anton Igorevich - Senior Lecturer of Aircraft and Rocket Building Department, OmSTU. SPIN-code: 2378-9723. AuthorID (SCOPUS): 57189506536. ResearcherID: O-8722-2016
Omsk, Mira Ave., 11, 644050
V. V. Kositsin
Omsk State Technical University
Russian Federation
Russian Federation
Blinov Viktor Nikolayevich, Doctor of Technical Sciences, Professor of Aircraft and Rocket Building Department, SPIN-code: 8934-4313. AuthorID (RSCI): 530029. AuthorID (SCOPUS): 56503115200.
Omsk, Mira Ave., 11, 644050
A. I. Lukyanchik
Omsk State Technical University
Russian Federation
Russian Federation
Kositsin Valeriy Vladimirovich - Candidate of Technical Sciences, Associate Professor of Aircraft and Rocket Building Department, SPIN-code: 8766-8891. AuthorID (RSCI): 723680. AuthorID (SCOPUS): 56503934600.
Omsk, Mira Ave., 11, 644050
References
1. Belokonov I. V., Ivliev A. B., Bogatyrev A. M. [et al.]. Vybor proyektnogo oblika dvigatel’noy ustanovki nanosputnika [Selection of project structure for nanosatellite propulsion system] // Vestnik Samarskogo Universiteta. Aerokosmicheskaya tekhnika, tekhnologii i mashinostroyeniye. Vestnik of Samara University. Aerospace and Mechanical Engineering. 2019. Vol. 18, no. 3. P. 29–37. (In Russ.).
2. Leslabay P., Lauretta R., Pedreira P. The ResistoJet as a simple and cost-effective propulsion system for nanoand microsatellites // 1st IAA Latin American Symposium on Small Satellites: Advanced Technologies and Distributed Systems. March 7–10, 2017. (In Engl.).
3. Romei F., Grubišić A. N. Numerical study of a novel monolithic heat exchanger for electrothermal space propulsion // Acta Astronautica. 2019. Vol. 159. P. 8–16. DOI: 10.1016/j.actaastro.2019.03.025. (In Engl.).
4. Romei F., Grubišić A. N. Validation of an additively manufactured resistojet through experimental and computational analysis // Acta Astronautica. 2020. Vol. 167. P. 14–22. DOI: 10.1016/j.actaastro.2019.10.046. (In Engl.).
5. Makled A., Othman M. Theoretical and experimental investigation of resisto-jet thruster // 17th International Conference on Applied Mechanics and Mechanical Engineering. 19–21 April, 2016. 15 р. URL: http://www.mtc.edu.eg/pub/Issues/IssuesPaper/20170111_111606.pdf (accessed: 11.09.2022). (In Engl.).
6. Blinov V. N., Vavilov I. S., Kositsin V. V. [et al.]. Design features and research of Electrothermal Microthrusters with Autonomous Heating Elements for the Purposes of Small Space Vehicle Orbital Manoeuvring // Indian Journal of Science and Technology. 2015. Vol. 8 (27). DOI: 10.17485/ijst/2015/v8i27/82937. (In Engl.).
7. Blinov V. N., Kositsyn V. V., Luk’yanchik A. I. [et al.]. Issledovaniya osnovnykh proyektnykh parametrov impul’snoy elektrotermicheskoy dvigatel’noy ustanovki nanosputnikov [Studies of the main design parameters of the pulsed electrothermal propulsion system of nanosatellites] // Kosmonavtika i raketostroyeniye. Cosmonautics and Rocket Science. 2022. Vol. 2 (125). P. 75–88. (In Russ.).
8. Litvinenko V. V. Vliyaniye kapillyarno-poristykh struktur na intensifikatsiyu protsessov teploobmena pri kipenii zhidkostey [The effect of capillary-porous structures on the intensification of heat exchange processes during boiling of liquids] // Molodoyuchenyy. Young Scientist. 2019. No. 7 (245). P. 113–116. (In Russ.).
9. Ovsyanik A. V., Makeyeva E. N. Opredeleniye parametrov teploobmena pri paroobrazovanii smesevykh khladogentov na vysokoteploprovodnykh poroshkovykh spechennykh kapillyarno-poristykh pokrytiyakh [Determination of parameters of exchange for vaporization of the mixed refrigerant on the high thermal conductivity sintered powder capillary-porous coatings] // Energetika. Izvestiya vysshikh uchebnykh zavedeniy i energeticheskikh ob”yedineniy SNG. Energy. Proceedings CIS Higher Educational Institutions and Power Energy Associations. 2018. Vol. 61, no. 1. P. 70–79. DOI: 10.21122/1029-7448-2018-61-1-70-79. (In Russ.).
10. Volodin O. A., Pecherkin N. I., Pavlenko A. N. Intensifikatsiya teploobmena pri kipenii i isparenii zhidkostey na modifitsirovannykh poverkhnostyakh [Heat transfer enhancement at boiling and evaporation of liquids on modified surfaces-a review] // Teplofizika vysokikh temperature. High Temperature. 2021. Vol. 59, no. 2. P. 280–312. DOI: 10.31857/S0040364421020149. (In Russ.).
11. Makeyeva E. N., Knysh O. A. Intensivnyye teploobmennyye poverkhnosti dlya ispariteley kholodil’nykh i teplonasosnykh ustanovok na smesevykh ozonobezopasnykh gidroftoruglerodakh [Intensive heat transfer surfaces for evaporators in refrigeration and heat pump systems using mixed ozone-safe hydrofluorocarbons] // Vestnik GGTU imeni P. O. Sukhogo: nauchno-prakticheskiy zhurnal. Vestnik GGTU imeni P. O. Sukhogo: Nauchno-Prakticheskiy Zhurnal. 2019. No. 3. P. 71–76. (In Russ.).
12. Hu H., Xu C., Zhao Y. [et al.]. Boiling and quenching heat transfer advancement by nanoscale surface modification // Sci. Rep. 2017. Vol. 7. P. 6117. DOI: 10.1038/s41598-017-06050-0. (In Engl.).
Review
For citations:
Blinov V.N., Kositsin V.V., Lukyanchik A.I. Studies of the design layout of resistojet with porous structure for propulsion systems of small spacecraft. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2023;7(1):55-60. (In Russ.) https://doi.org/10.25206/2588-0373-2023-7-1-55-60
Views:
12
JATS XML
Email this article 