The analysis of single-stage piston compressors operation under various conditions
https://doi.org/10.25206/2588-0373-2023-7-3-9-14
EDN: MZDMPS
Abstract
The operation of compressor equipment is associated with a constant change in external conditions (pressures in the suction and discharge lines, suction temperature, intake gas composition), which naturally affects the efficiency of the working process and can lead to unacceptable operating conditions. The passport data of the compressors correspond to the nominal operating modes. The paper presents studies allowing to supplement the operational documentation with information about the permissible modes of operation. The presented data may allow us to correctly develop an automation system with acceptable levels of locks.
About the Authors
A. G. Nikiforov
Smolensk State Agrarian Academy
Russian Federation
Russian Federation
Nikiforov Alexander Georgievich, Doctor of Technical Sciences, Professor, Head of Mechanization Department
AuthorID (RSCI): 812960
Smolensk, Bolshaya Sovetskaya St., 10/2, 214000
L. A. Muslova
St. Petersburg University of the Ministry of Internal Affairs
Russian Federation
Russian Federation
Muslova Lyubov Anatolyevna, Candidate of Pedagogy Sciences, Associate Professor of Foreign Languages Department
Saint Petersburg, Letchik Pilyutov St., 1, 198206
References
1. Baykov I. R., Kitayev C. B., Fayrushin Sh. Z. Diagnostirovaniye tekhnicheskogo sostoyaniya porshnevykh kompressorov [Diagnostics of reciprocating compressors’] // Energobezopasnost’ i energosberezheniye. Energy Safety and Energy Saving. 2015. No. 3 (63). P. 28–30. (In Russ.).
2. Busarov S. S., Belikov A. V., Kapelyukhovskiy A. A., Kapelyukhovskaya A. A. Analiz konkurentosposobnosti vodorodosoderzhashchikh tsirkulyatsionnykh kompressorov na baze tikhokhodnykh dlinnokhodovykh stupeney [Analysis of the competitiveness of hydrogen-containing circulating compressors based on low-speed long-stroke stages] // Izvestiya TulGU. Tekhnicheskiye nauki. Izvestiya Tula State University. Technical Science. 2023. Issue. 1. P. 499–503. DOI: 10.24412/2071-6168-2023-1-499-503. (In Russ.).
3. Kotlov A. A., Burakov A. V. Sravnitel’nyy analiz raboty odnostupenchatogo porshnevogo kompressora, szhimayushchego razlichnyye gazy [Comparative analysis of single-stage reciprocating compressor compressing different gases] // Omskiy nauchnyy vestnik. Ser. Aviatsionno-raketnoye i energeticheskoye mashinostroyeniye. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2019. Vol. 3, no. 4. P. 26–35. DOI: 10.25206/2588-0373-2019-3-4-26-35. (In Russ.).
4. Corberan J. M., Gonzalvez J., Urchueguia J [et al.]. Modelling of Refrigeration Piston Compressors // International Compressor Engineering Conference. 2000. Paper 1436. URL: http://docs.lib.purdue.edu/icec/1436 (accessed: 11.08.2023). (In Engl.).
5. Davies R., Bell A. Mathematical modeling of reciprocation air compressors / Mining Technol. 1987. No. 795. 69. P. 13–14. (In Engl.).
6. Plastinin P. I. Porshnevyye kompressory. V 2 t. T. 1. Teoriya i raschet [Piston compressors. In 2 vols. Vol. 1. Theory and calculation]. 3rd ed. Moscow, 2006. 456 p. ISBN 5-9532-0428-0. (In Russ.).
7. Frenkel M. I. Porshnevyye kompressory. Teoriya, konstruktsii i osnovy proyektirovaniya [Piston compressors. Theory, designs and basics of design]. 3rd ed., revised and additional. Leningrad, 1969. 744 p. (In Russ.).
8. Berman Ya. A. Sistemy okhlazhdeniya kompressornykh ustanovok [Cooling systems for compressor plants]. Leningrad, 1984. 288 p. (In Russ.).
9. Voropay P. I. Effektivnost’ razlichnykh sposobov okhlazhdeniya kompressornykh tsilindrov gazomotorkompressorov [Efficiency of various methods of cooling compressor cylinders of gas engine compressors] // Mashiny i neftyanoye oborudovaniye. Machines and Oil Equipment. 1966. No. 5. P. 13–19. (In Russ.).
10. Ivanov V. A. Issledovaniye teploobmena v porshnevykh kompressorakh [Study of heat transfer in reciprocating compressors]. Omsk, 1974. 140 p. (In Russ.).
11. Shcherba V. E. Povysheniye effektivnosti raboty ob”yemnogo kompressora s vneshnim szhatiyem putлm vpryska zhidkosti [Improving the efficiency of a volumetric compressor with external compression by liquid injection] // Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroyeniye. BMSTU Journal of Mechanical Engineering. 1985. No. 5. P.71–76. (In Russ.).
12. Yusha V. L. Povysheniye ekonomichnosti i bezopasnosti raboty vintovogo kompressora s gazozhidkostnym rabochim telom [Improving the efficiency and safety of the screw compressor with a gas-liquid working fluid]. Omsk, 1986. 273 p. (In Russ.).
13. Busarov S. S., Goshlya R. Yu., Gromov A. Yu., Nedovenchanyy A. V., Busarov I. S., Titov D. S. Matematicheskoye modelirovaniye protsessov teploobmena v rabochey kamere tikhokhodnoy stupeni porshnevogo kompressora [Mathematical modeling of processes of heat exchange in the working chamber of low-speed reciprocating compressors Stage] // Kompressornaya tekhnika i pnevmatika. Compressor Technology and Pneumatics. 2016. No. 6. P. 6–10. (In Russ.).
14. Prilutskiy A. I., Prilutskiy I. K., Ivanov D. N., Demakov A. S. Teploobmen v stupenyakh mashin ob”yemnogo deystviya. Sovremennyy podkhod [Heat transfer in the steps of volumetric machines. Modern approach] // Kompressornaya tekhnika i pnevmatika. Compressor Technology and Pneumatics. 2009. No. 2. P. 16–23. (In Russ.).
15. GOST 10393-2014. Kompressory, agregaty kompressornyye s elektricheskim privodom i ustanovki kompressornyye s elektricheskim privodom dlya zheleznodorozhnogo podvizhnogo sostava Obshchiye tekhnicheskiye usloviya. [Compressors, electrically driven compressor sets and compressor units for the railway rolling stock. General specifications]. Moscow, 2016. 21 p. (In Russ.).
16. GOST 31843-2013. Neftyanaya i gazovaya promyshlennost’. Kompressory porshnevyye. Obshchiye tekhnicheskiye trebovaniya [Petroleum and natural gas industries. Reciprocating compressors. General technical requirements]. Moscow, 2015. 166 p. (In Russ.).
Review
For citations:
Nikiforov A.G., Muslova L.A. The analysis of single-stage piston compressors operation under various conditions. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2023;7(3):9-14. (In Russ.) https://doi.org/10.25206/2588-0373-2023-7-3-9-14. EDN: MZDMPS
Views:
18
JATS XML
Email this article 