Conditionally dynamic analysis of the centrifugal compressor operation in the aggregate recirculation line

The procedure for conditionally dynamic (quasi-dynamic) hydraulic and thermal calculation of recirculation lines of compressor stations has been developed. As an example, the solution to the problem of reconstruction of the linear compressor station of the main gas pipeline is considered. Using the developed methodology, options for upgrading the existing recirculation line in order to increase its throughput are proposed. The gas temperature change in the recirculation line is analyzed due to various factors (heat exchange with soil, throttling) at the starting modes of constant and variable rotations of the compressor rotor. The analysis of the change in the recirculation cycle time and the rate of temperature growth at the compressor inlet per unit time is performed.

1. STO Gazprom 2-3.5-051-2006. Normy tekhnologicheskogo proyektirovaniya magistral’nykh gazoprovodov [Standards for technological design of main gas pipelines]. Moscow, 2005. 198 p. (In Russ.).

2. STO Gazprom 2-4.1-212-2008. Obshchiye tekhnicheskiye trebovaniya k truboprovodnoy armature, postavlyayemoy na ob”yekty OAO «Gazprom» [General technical requirements for pipeline fittings supplied to the facilities of OJSC «Gazprom»]. Moscow, 2008. 86 p. (In Russ.).

3. Rekomendatsii po povysheniyu vibroustoychivosti tekhnologicheskikh truboprovodov pri proyektirovanii i rekonstruktsii KTs KS [Recommendations for increasing the vibration resistance of process pipelines during the design and reconstruction of Compressor shop Compressor station]. Moscow, 2002. 29 p. (In Russ.).

4. Guzel’bayev Ya. Z. Nekotoryye osobennosti dinamicheskikh svoystv tsentrobezhnykh kompressorov i seti [Some features of the dynamic properties of centrifugal compressors and networks] // Potrebiteli-proizvoditeli kompressorov i kompressornogo oborudovaniya. Consumers-Manufacturers of Compressors and Compressor Equipment. Saint Petersburg, 2008. P. 191–196. (In Russ.).

5. Shchurovskiy V. A. Osobennosti staticheskoy i dinamicheskoy rabotosposobnosti TsBK i gazotransportnoy seti [Features of static and dynamic performance of the pulp and paper mill and gas transportation network] // Potrebiteli-proizvoditeli kompressorov i kompressornogo oborudovaniya. ConsumersManufacturers of Compressors and Compressor Equipment. Saint Petersburg, 2013. P. 53–58. (In Russ.).

6. Akimov V. I., Bakiyev T. A., Skrynnikov S. V. [et al.]. Obespecheniye vibroustoychivosti tekhnologicheskikh truboprovodov puskovogo kontura KS [Ensuring vibration resistance of process pipelines of the Compressor station starting circuit] // Gazovaya promyshlennost’. GAS Industry of Russia. 2015. No. 8 (726). P. 56–59. EDN: UZMVAB. (In Russ.).

7. Lapitskiy A. E., Kozachenko L. I., Korolev A. A. Osobennosti zavodskikh (stendovykh) i ekspluatatsionnykh ispytaniy tsentrobezhnykh gazovykh kompressorov [Features factory (poster) and operational tests of centrifugal gas compressors] // Kompressornaya tekhnika i pnevmatika. Compressor Technology and Pneumatics. 2015. No. 6. P. 10–17. EDN: OHMUFL. (In Russ.).

8. Fil’kin N. Yu., Vanyashov A. D., Krupnikov A. V. Analiz rezhimov raboty i vybor tiporazmera tsekhovogo reguliruyushchego klapana tekhnologicheskoy obvyazki kompressornykh stantsiy [Analysis of operating modes and selection of standard size of a shop control valve for the process piping of compressor stations] // Dinamika sistem, mekhanizmov i mashin. Dynamics of Systems, Mechanisms and Machines. In 5 bks. Omsk, 2009. Bk. 2. P. 158– 162. ISBN 978-5-8149-0766-0. (In Russ.).

9. Fil’kin N. Yu., Vanyashov A. D. Vybor tiporazmera agregatnogo i tsekhovogo reguliruyushchikh klapanov gazoperekachivayushchikh kompressornykh stantsiy na osnove tekhniko-ekonomicheskikh i gidravlicheskikh raschetov [Selection of standard size of unit and shop control valves of gas pumping compressor stations based on technical, economic and hydraulic calculations] // Vakuumnaya, kompressornaya tekhnika i pnevmoagregaty. Vacuum, Compressor Technology and Pneumatic Units. Moscow, 2010. P. 123–128. ISBN 978-5-900025-53-7. (In Russ.).

10. Fil’kin N. Yu., Yusha V. L., Vanyashov A. D. Otsenka vliyaniya konfiguratsii lokal’nykh uchastkov truboprovodnoy obvyazki kompressornykh ustanovok na ikh teplonapryazhennoye sostoyaniye [Assessment of the influence of the configuration of local sections of piping of compressor units on their thermally stressed state] // Trudy 15-y Mezhdunar. nauch.-tekhn. konf. po kompressornoy tekhnike. Proceedings of the 15th Int. ScientificTechnical Conf. on Compressor Technology. In 2 vols. Kazan, 2011. Vol. 2. P. 21–28. (In Russ.).

11. Amin A. A., Maqsood M. T., Mahmood-Ul-Hasan K. Surge protection of centrifugal compressors using advanced antisurge control system // Measurement and Control. 2021. Vol. 54. P. 1–16. DOI: 10.1177/0020294020983372. (In Engl.).

12. Amin A. A., Mahmood-Ul-Hasan K. Advanced anti-surge control algorithm for turbine driven centrifugal compressors // Science International (Lahore). 2015. Vol. 27 (3). P. 1845–1854. (In Engl.).

13. Wolfswinkel van O., Smeulers J. P. M. Evaluation of Anti-Surge Control Concepts during ESD Simulation of dynamic process behaviour with PULSIM // Engineering. 2002. P. 1–6. URL: https://folk.ntnu.no/skoge/prost/proceedings/escape12/CD_ESCAPE12_with_supplementary_proceedings/escape/C11.pdf (accessed: 11.12.2023). (In Engl.).

14. Belardini E., Tapinassi L., Rubino D. T. Modeling of pressure dynamics during surge and ESD // 3rd Middle East Turbomachinery Symposium (METS III). Doha, 2015. P. 1–13. (In Engl.).

15. Morini M., Pinelli M., Venturini M. Development of a One-Dimensional Modular Dynamic Model for the Simulation of Surge in Compression Systems // Journal of Turbomachinery. 2007. Vol. 129 (3). P. 437–447. DOI: 10.1115/1.2447757. URL: https://core.ac.uk/download/pdf/187123742.pdf (accessed: 11.12. 2023). (In Engl.).