Prospects for creating modern piston compressors with increased performance
https://doi.org/10.25206/2588-0373-2024-8-1-25-31
EDN: TGSMVH
Abstract
The current level of performance of piston compressors, characterized by the delivery coefficient, is at the level of 0,7. Advanced designs have higher rates, reaching values of 0,8...0,85. However, the negative effect of dead volume prevents the performance level of, for example, screw compressors from being achieved. Therefore, reducing the influence of dead volume on productivity can be considered the main task in improving modern piston machines.
The presented work proposes a solution to eliminate the influence of the most significant component of the dead volume — linear space. As experimental studies have shown, the use of elastic discs mounted on the piston will virtually eliminate linear dead volume, ensure operational safety and increase the flow rate to 14 %.
About the Authors
S. S. BusarovRussian Federation
Busarov Sergey Sergeevich, Candidate of Technical Sciences, Associate Professor, Associate Professor of Refrigeration and Compressor Equipment and Technology Department,
11, Mira Ave., Omsk, 644050.
AuthorID (RSCI): 610336;
AuthorID (SCOPUS): 51560987400.
K. A. Bakulin
Russian Federation
Bakulin Konstantin Aleksandrovich, Student of Petrochemical Institute,
11, Mira Ave., Omsk, 644050.
R. E. Kobylskiy
Russian Federation
Kobylskiy Roman Eduardovich, Assistant of Refrigeration and Compressor Equipment and Technology Department,
11, Mira Ave., Omsk, 644050.
AuthorID (SCOPUS): 57220077521.
I. S. Busarov
Russian Federation
Busarov Igor Sergeevich, Assistant of Refrigeration and Compressor Equipment and Technology Department,
11, Mira Ave., Omsk, 644050.
AuthorID (SCOPUS): 57191038188.
References
1. Plastinin P. I. Porshnevyye kompressory. V 2 t. T. 2. Osnovy proyektirovaniya. Konstruktsii [Piston compressors. In 2 vols. Vol. 2. Fundamentals of Design. Constructions]. 3rd ed. Moscow, 2008. 711 p. (In Russ.).
2. Shcherba V. E. Teoriya, raschet i konstruirovaniye porshnevykh kompressorov ob”yemnogo deystviya [Theory, calculation and design of positive displacement piston compressors]. 2nd ed., add. Moscow, 2023. 323 p. (In Russ.).
3. Kuznetsov L. G., Molodova Yu. I., Prilutskiy A. I. Povysheniye germetichnosti porshnevykh kompressorov i detanderov [Improving the tightness of piston compressors and expanders] // Kholodil’naya tekhnika. Refrigeration Equipment. 1999. No. 9. P. 24–25. (In Russ.).
4. Yusha V. L. Sistemy okhlazhdeniya i gazoraspredeleniya ob”yemnykh kompressorov [Cooling and gas distribution systems for volumetric compressors]. Novosibirsk, 2006. 286 p. EDN: QMJZNJ. (In Russ.).
5. Patent 2694104 Russian Federation, IPC F 04 B 39/04 (2006.01), F 0 4B 53/14 (2006.01). Porshnevoy kompressor [Pistontype Compressor] / Yusha V. L., Busarov S. S., Nedovenchanyy A. V. [et al.]. No. 2018132179. (In Russ.).
6. Kotlov A. A. Matematicheskaya model’ vozdushnogo porshnevogo kompressora srednego davleniya dlya resheniya zadach energoaudita [Mathematical model of a medium pressure air piston compressor for solving energy audit problems]. Saint Petersburg, 2011. 138 p. (In Russ.).
7. Kotlov A. A., Burakov A. V. Sravnitel’nyy analiz raboty odnostupenchatogo porshnevogo kompressora, szhimayushchego razlichnyye gazy [Comparative analysis of single-stage reciprocating compressor compressing different gases] // Omskiy nauchnyy vestnik. Ser. Aviatsionno-raketnoye i energeticheskoye mashinostroyeniye. Omsk Scientific Bulletin. Series AviationRocket and Power Engineering. 2019. Vol. 3, no. 4. P. 26–35. DOI: 10.25206/2588-0373-2019-3-4-26-35. (In Russ.).
8. Prilutskiy I. K. Razrabotka, issledovaniye i sozdaniye porshnevykh kompressorov i detanderov dlya kriogennoy tekhniki [Development, research and creation of piston compressors and expanders for cryogenic technology]. Leningrad, 1991. 401 p. (In Russ.).
9. Yusha V. L., Busarov S. S., Nedovenchany A. V., Goshlya R. Yu. Eksperimental’noye issledovaniye rabochikh protsessov tikhokhodnykh dlinnokhodovykh bessmazochnykh porshnevykh kompressornykh stupeney privysokikh otnosheniyakh davleniy nagnetaniya k davleniyu vsasyvaniya [Experimental study of working processes of low-speed longstroke lubrication free piston compressor stages at high discharge pressure to suction pressures] // Omskiy nauchnyy vestnik. Ser. Aviatsionno-raketnoye i energeticheskoye mashinostroyeniye. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2018. Vol. 2, no. 2. P. 13–18. DOI: 10.25206/2588-0373-2018-2-2-13-18. (In Russ.).
10. Yusha V. L., Busarov S. S. Eksperimental’naya otsenka indikatornogo koeffitsiyenta podachi porshnevoy dlinnokhodovoy kompressornoy stupeni [Experimental assessment of the indicator feed coefficient of a piston long-stroke compressor stage] // Kompressornaya tekhnika i pnevmatika. Compressor Technology and Pneumatics. 2020. No. 3. P. 39–41. (In Russ.).
11. Yusha V. L. Experimental evaluation of the efficiency of long-stroke, low-speed reciprocating compressor stages in compression of different gases // Chemical and Petroleum Engineering. 2018. Vol. 54. P. 593–597. DOI: 10.1007/s10556-018-0520-1. (In Engl.).
12. Kassandrova O. N., Lebedev V. V. Obrabotka rezul’tatov [Processing of observation results]. Moscow, 1970. 104 p. (In Russ.).
13. Granovskiy V. S., Siraya T. N. Metody obrabotki eksperimental’nykh dannykh pri izmereniyakh [Methods for processing experimental data during measurements]. Leningrad, 1990. 288 p. (In Russ.).
Review
For citations:
Busarov S.S., Bakulin K.A., Kobylskiy R.E., Busarov I.S. Prospects for creating modern piston compressors with increased performance. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering. 2024;8(1):25-31. (In Russ.) https://doi.org/10.25206/2588-0373-2024-8-1-25-31. EDN: TGSMVH
JATS XML

















